Info: Pro M, L or XL Filters; Three Types Available
The standard 3-stage HEPASilent Particle Filter is for removing allergy-inducing airborne pollutants such as pollen, dust, dust mites, pet dander, bacteria or viruses, and other particles.
The thicker SmokeStop filter starts with that standard particle filter and adds a one inch layer of activated carbon to also remove gaseous pollutants such as tobacco smoke and volatile organic compounds (VOCs). VOCs are gases given off by indoor sources such as household paints and cleaning products.
There is also an optional Carbon+ Filter available, which is thinner than the other two, and can be used as an add-on to either of them, for rooms where even heavier gaseous pollutants may be an issue, such as when there may be exhaust fumes coming in. It features activated carbon, alumina and other binders selected for their ability to remove heavy gaseous pollutants.
All three Pro filter types fold or pivot out to become V-shaped once installed, but they can be closed up like a book when you remove them to replace the filter, to spare you from breathing in the pollutants while disposing of them.
Blueair's fiber media is free of chemicals and binders and has been ultrasonically bonded to prevent new particles from being added to your environment during its operation.
Blueair Pro Filter Change
When the time comes to replace your filter, the filter LED icon will light up. There are two filters in this range to choose from: the Particle Filter, and the SmokeStop Filter. Along with these filters, you can also use the Carbon+ Filter addition for extra protection.
When receiving your new filter, simply open the Blueair Pro casing, disengage the old filter, and pull it out. Notice that the dirt stays inside the fold, keeping you from getting into contact with it. Now you can install your new filter. Close the casing and reset the filter timer by pressing directly below the red filter replacement indicator for approximately 10 seconds, until the indicator has flashed and disappeared.
With your new filter installed, you can recycle the old one. Blueair, clean air for everyone.
|Carbon+ Add-On Filter||Particle Filter||SmokeStop Filter|
|Filter Type||Optional extra activated carbon filter for removal of heavy gaseous pollutants.||Gradient structured filters with thermally bonded fibres containing polypropylene and polyethylene free of chemicals and binders. Naturally anti-bacterial. Fiber shedding resistant.||Gradient structured filters with thermally bonded fibres containing polypropylene and polyethylene free of chemicals and binders. Naturally anti-bacterial. Fiber shedding resistant.|
(H x W x D)
|349 x 178 x 21mm
(13.7 x 7 x 0.8 inches)
|349 x 205 x 64mm
(13.7 x 8 x 2.5 inches)
|349 x 205 x 90mm
(13.7 x 8 x 3.5 inches)
|Number of filters included||1||1||1|
|Pre-filter Media||n/a||Low density foam||n/a|
|Filter Media||Activated carbon pellets||Thermally bonded polyolefin||Thermally bonded polyolefin and activated carbon pellets|
|Filter frame material||Paper||PP||PP|
|Envelope||Honeycomb PE||n/a||Honeycomb PE|
|HEPASilent technology||n/a. Provides additional sheets of activated carbon to remove gaseous pollutants, to work in tandem with one of the two types of HEPA filters.||Certified efficiency 99.97% for particles down to 0.1 micron such as dust pollen, bacteria, virus, pet dander, mold spores and other airborne particles.||Certified efficiency 99.97% for particles down to 0.1 micron such as dust pollen, bacteria, virus, pet dander, mold spores and other airborne particles, with additional sheets of activated carbon to remove gaseous pollutants.|
|Recommended filter change||6 months (4,380 hours) when used 24 hours a day||6 months (4,380 hours) when used 24 hours a day||6 months (4,380 hours) when used 24 hours a day.|